Prusa Mini Hexagon Handle
This is a simple, yet durable, handle for the Prusa Mini. It was designed to match the David Warboss Mini Base. It attaches to the Z axis using screws and t-slot nuts.
This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!
Print Instructions
I was able to print this handle with no support material, but the surface finish did suffer a bit on the bottom and in the holes for the screws. You could try either way, but the included GCode is no supports, otherwise I recommend:
- Layer Height: 0.15mm
- Infill: 30%
- Supports: Not needed
Materials
In order to attached these you need some t-slot nuts and screws. I used:
- 3030 Series T-Slot Nut M6¹
- M6 x 12mm Button Head Screw¹
- Here is the Prusament PETG¹ that matches the Mini
Download
Grab the model files at Printables.com.